Hosa Technology

Audio Available

Component

Delivery

Eprint Folders

Format

Item Sequence

Large Print Edition

Marketed Status

Minimum Sell Quantity

MINTS Data Available

Product Line

Prop65

Score Available

Video Available

This adapter is designed to change an XLR input into an XLR output.

Gender Changer XLR3m XLR3m

Hardware GXX-144

This adaptor is designed to adapt a mini stereo phone plug to a stereo phone jack. It is ideal for use as a headphone adaptor.

Adaptor 3.5mm Female TRS 1/4" TRS Male

Hardware GPM-103

Good cable management is important to good sound quality. These hook and loop organizers make it easy to keep signal and power cables separated and kink free for a stronger signal chain. Prevents shorts that result in intermittent or lost signals. Reduces frayed shielding that can lead to increased hum and noise. Preserves the shape of the dielectric for accurate signal transmission.

Wire Tie Hook and Loop Gap 8in 5pc

Hardware WTI-148G

This cable is designed to connect two XLR outputs to one XLR input. It may be used to connect two microphones to one channel on a mixing console when a second channel is unavailable. Features include: XLR connectors with internal strain relief for rugged reliability; Oxygen-Free Copper (OFC) conductors for enhanced signal clarity; OFC spiral shields for effective EMI and RFI rejection and flexibility

Y Cable Dual XLR3m to XLR3f

Hardware YXF-119

Size

This cable is designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone or instrument, or most computer peripherals to a PC. Features include: Burst data transfer rates up to 480 Mbps (system dependent) Compliance with the USB 2.0 serial bus interface standard Backward compatibility with all USB 1.1 interfaces

USB 2.0 Cable 10ft

Hardware USB-210AB

This adapter is designed to match 200R output impedance to 50K input impedance. It is ideal for connecting a microphone to hi-Z instrument jack. Maximizes signal fidelity when using impedance mismatched gear; minimizes high frequency and level loss caused by signal reflections and eliminates noise and hum caused by an impedance mismatch.

Hosa Mic Z Transformer XLR3f 1/4" TS

Hardware MIT-435

This cable is designed to extend the reach of hard-wired headphones and adapt a mini stereo phone plug to a stereo phone jack. It may also be used as a stereo extension cable.

Headphone Ext 3.5mm Female 1/4" Male 10ft

Hardware MHE-310

This cable is designed to extend the reach of hard-wired headphones with a stereo phone plug. It may also be used as a stereo extension cable.

Headphone Extension Cable 1/4"

Hardware 10 foot 1/4"

This adaptor is designed to adapt a stereo phone plug to a mini stereo phone jack. It is ideal for use as a headphone adaptor.

Adaptor 1/4" TRS Female 3.5mm TRS Male

Hardware GMP-112

This adaptor is designed to split a stereo signal. It is ideal for use as a headphone adaptor, adapting one headphone jack to two headphones.

Adaptor Dual 1/4" TRS Female 1/4" TRS Male

Hardware GPP-359

Elevate your audio experience with this 20-foot XLR to XLR microphone cable. Engineered for durability and clear sound transmission, it's the perfect choice for both studio recordings and live performances. Ensure your vocals and instruments shine with reliability and professional quality, connecting effortlessly every time. - Note: This music is composed by humans. No human-written product description is available, limiting search visibility. The AI-assisted description is for reference only.

20' Hosa XLR to XLR Cable

This adaptor is designed to couple cables with phone plugs. It works with mono or stereo plugs.

Coupler 1/4" TRS Female Same

Hardware GPP-105

This cable is designed to connect a digital audio player or similar device to a stereo system. It is ideal for connecting an iPod®, laptop, or similar device to a hi-fi receiver. Features include: Nickel-plated plugs for rugged durability and efficient signal transfer Oxygen-Free Copper (OFC) conductors for enhanced signal clarity OFC spiral shields for effective EMI and RFI rejection and flexibility

Y Cable 3.5mm TRS Male RCA Male 10ft

Hardware CMR-210

This cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications. Features include: Nickel-plated plugs for rugged durability and efficient signal transfer Oxygen-Free Copper (OFC) conductors for enhanced signal clarity OFC spiral shield for effective EMI and RFI rejection and flexibility

Cable 3.5mm TRS Male 1/4" TRS Male 10ft

Hardware CMS-110

This cable is designed to interconnect electric guitar pedal effects. Right-angle plugs allow close spacing of pedal effects on pedalboards. Features include: Nickel-plated plugs for rugged durability and efficient signal transfer Oxygen-Free Copper (OFC) conductors for enhanced signal clarity OFC spiral shields for effective EMI and RFI rejection and flexibility

Guitar Patch Cable Molded 6in

Hardware CFS-106

This cable is designed to a connect a microphone with an XLR output to a mini stereo phone input. It is ideal for connecting a pro mic to a DV camera or portable audio recorder. Features include: XLR connector with internal strain relief for rugged reliability Oxygen-Free Copper (OFC) conductor for enhanced signal clarity OFC spiral shield for effective EMI and RFI rejection and flexibility

Mic Cable XLR3f 3.5mm TRS Male Right Angle 5ft

Hardware XVM-105F

This cable is designed to extend the reach of hard-wired headphones with a mini stereo phone plug. It may also be used as a stereo extension cable.

Headphone Ext 3.5mm Same 25ft

Hardware MHE-125

This cable is designed to connect an electrical appliance with a C14 inlet to line power. It is ideal for use with computer equipment and pro audio gear. Features include: Oxygen-Free Copper (OFC) conductors for lower resistance and increased current flow Black PVC jacket for durability, flexibility, and low visibility on stage Intended for use in North America and nations that have adopted the NEMA standard

Power Cord IEC C13 NEMA 5-15p 8ft

Hardware PWC-148

This cable is designed to connect an audio device with a mini stereo phone output to pro audio gear with unbalanced phone inputs. It is ideal for connecting an iPod®, laptop, or similar device to a mixing console. Features include: Nickel-plated plugs for rugged durability and efficient signal transfer Oxygen-Free Copper (OFC) conductors for enhanced signal clarity OFC spiral shields for effective EMI and RFI rejection and flexibility

Y Cable 3.5mm TRS Male 1/4 TS Male 3ft

Hardware CMP-153

Global Sections - CORE [DO NOT TOUCH]*

Favicon

Need Help? Contact Us or call 1-800-345-6296    Live Chat

Header

Don't have a business account? Create one

Products